NF-8601W Multi-Function Cable Tester
8 remote identifiers. 2.8-inch color screen. PoE testing. Split testing, Port flash. Ping testing.
Quickly understand NF-8601W cable tester through the device buttons and feature diagrams.
Cable Continuity Test
Test the continuity of RJ45, RJ11, BNC cables, such as open, cross, short, split pair etc.
Put one side of the cable into PoE & PING ports, the other connects to the switch. Choose the "Port Flash" and enter the function. You can see a red circle from the screen and it will flash the same frequency as the LED lights on the switch, than means this is the target cable.
Cable Length Test
Put one side of the cable to the main port, disconnect the far end of the cable. And the length measurement accuracy is more than 98%.
Cable Length Calibration
As the cable material are different, there might be some different in testing the cable length. So we need to calibrate the cable. Use a cable which is more than 10 meter, then enter the calibration function to measure the length. When we get the result, then save the data to the device. And the data can be loaded out while we measure length next time.
Test which pin of the network cable is providing the power.
Test network signal and the cable is connected or not.
Cable installation and networking maintainance.