NOYAFA NF-8209 Pro Network Cable Toner & Probe Kit with Integrated Trace & Wire Mapping Receiver, Anti-interference Cable Locating, Cable Fault Testing, Length Testing, PoE, Port Flash, Crimp Testing for Network Installation & Maintenance

Features & Benefits:

• Digital & Analog Signal Tracing in One Kit. The NF-8209 Pro combines digital and analog signaling in one toner and probe kit, making it suitable for different cable locating scenarios. Whether you need stronger anti-interference performance or general cable tracing, one tool covers more daily network maintenance tasks.
  
  
• Integrated Cable Tracing & Wire Mapping Receiver. The NF-8209 Pro receiver is more than a cable locating probe - it also includes built-in wire mapping capability.
  After tracing and identifying the target cable, technicians can plug the cable directly into the receiver’s RJ45 CONT port and check the wiring status through the built-in wire map indicator lights. Normal wiring, crossed pairs, short circuits, and open circuits can be quickly identified without switching to a separate wire mapping tester.
  
  
• Clear-Display Wire Mapping & Cable Fault Testing. Test RJ45 network cables for common wiring problems including open circuit, short circuit, crossed pairs, and incorrect wire sequence, and display the result on the emitter's 128 × 64 dot-matrix LCD display with backlight for clear reading.
  
  
• Cable Length Measurement up to 350m (~1,148ft). Measure the length of CAT5 and CAT6 network cables with a testing range of 5–350m. The tester can measure individual wire pairs such as 1-2, 3-6, 4-5, and 7-8, helping identify cable length, disconnection points, or out-of-range cable conditions more efficiently.
  
  
• PoE Testing with Voltage, Polarity & Power Mode Detection. Detect PoE power supply status, voltage, polarity, and power supply mode. The NF-8209 Pro supports standard PoE switch testing and can identify different power supply methods, including end-span, mid-span, 8-core power supply, and non-standard PoE conditions.
  
  
• Port Flash for Switch Port Identification. Connect the cable to the switch or router and use the Port Flash function to quickly locate the corresponding network port. The flashing indicator makes it easier to identify the correct port during network installation, maintenance, or cable management.
  
  
• RJ45 Crimp Test for Plug Quality Inspection. The QC test function checks whether the RJ45 plug and copper contacts are properly crimped. It helps installers quickly verify plug quality after crimping and reduce connection failures caused by poor contact or blocked pins.
  
  
• NCV Detection for Safer Electrical Work. The receiver includes NCV voltage detection, allowing users to detect AC voltage without direct contact. This adds an extra layer of safety when working around cables, walls, electrical panels, or mixed low-voltage and power wiring environments.
  
  
• Rechargeable Type-C Design. Both the emitter and receiver use built-in rechargeable lithium batteries with Type-C charging, reducing the need for disposable batteries and making the kit more convenient for daily field use.