NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호
NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호
NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호
NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호
NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호
NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호
NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호

NF-8209Pro 전문 네트워크 케이블 테스터 – 정확한 신호 강도 및 안전 보호

정가 $99.99 USD 판매 가격$69.99 USD
/
배송 결제시 계산.

Beware of low-priced refurbished devices. Buy official.
  • 30-Days Money Back Guarantee 
  • In stock, Fast Free Shipping
Buy more and save more
  • BUY OVER $300 USD for 10% OFF: Copy code BF300TEN
  • BUY OVER $600 USD for 15% OFF: Copy code BF600ELV
  • BUY OVER $1,000 USD for 20% OFF: Copy code BF1KTEW

이 사이트는 hCaptcha에 의해 보호되며, hCaptcha의 개인 정보 보호 정책 서비스 약관 이 적용됩니다.

특징 및 이점:

  • 높은 신호 강도 측정: 신호 강도와 케이블 무결성을 정확하게 측정하여 적절한 네트워크 성능을 보장합니다.

  • 안전 보호: 사용 중 사고를 예방하는 안전보호 기능을 탑재하여 안정적인 작동을 보장합니다.

  • 사용자 친화적인 인터페이스: 명확한 판독을 위한 대형 디스플레이 화면을 갖춘 간단하고 사용하기 쉬운 인터페이스입니다.

  • 다중 케이블 테스트: 다양한 유형의 케이블을 테스트할 수 있어 다양한 네트워크 설정에 적합합니다.

  • 핸즈프리 작동: 최대한의 편의성을 위해 단일 엔드 핸즈프리 테스트 모드를 포함합니다.

  • 휴대성과 내구성: 이동이 잦은 전문가에게 적합한 컴팩트하고 내구성이 뛰어난 디자인으로 휴대성과 신뢰성이 향상되었습니다.

  • 긴 배터리 수명: 오래 지속되는 배터리로 전원이 공급되어 자주 충전하지 않고도 오랫동안 사용할 수 있습니다.

  • 고급 신호 향상: 더 먼 거리에서도 더 선명한 판독값을 위해 신호 수신을 강화합니다.

Wiremap:

  • Cable types: CAT5/CAT6
  • Cable sequence and fault testing: Normal, open circuit short circuit, cross,etc
  • STP/UTP: Both compatible
  • Max range: 600m / 1,968ft

QC Test:

  • Test type: 8P
  • Response speed: No longer than 1 second
  • Minimum recognition: 10cm / 3in

Length:

  • Test line: CAT5 & 6
  • Test range: 2.5 - 200m /8 - 656ft
  • Accuracy: ≤20m±4.6m; 20-100m ±2.4m; >100m±3.2m

Scan:

  • Cable type: CAT5 & 6
  • Max signal voltage: 5V ± 1.0VP-P
  • Frequency: 455KHz
  • Dual mode: Analog / digital mode
  • Max range: 600m / 1,968ft

PoE:

  • Voltage test range: DC 5-60V
  • Power supply core jumper mode: End jumper, middle jumper, 8-core power supply, unknown.
  • PSE type: Non-standard, IEE802.3at/af

Port Blinks

  • Full-duplex/ half-duplex recognition
  • Auto-negotiation/ non-auto-negotiation
  • Switch type: 10m/100m/1000m

Transmitter:

  • LCD Display: 180*64 with backlight
  • Language: Chinese/English
  • Ports: RJ45 * RJ11
  • Power supply: 3.7V 1400mAh polymer lithium battery
  • Low battery power indication: yes
  • Auto-off: 15/30/60min or off
  • Voltage protection: DC60V
  • Maxi working current: ≤200mA
  • Size: 125*70*32mm

Receiver:

  • Adjustable scan strength: Yes
  • NCV: AC70V - 1000V 50/60Hz
  • Voltage protection: DC 60V
  • Maxi working current: ≤200mA
  • Ports: RJ45
  • Voice prompt: yes
  • Headphone jack: yes
  • LED: Power indication & LED lighting
  • Power supply: 3.7V 1400mAh polymer lithium battery
  • Size: 198*50*30mm

NOYAFA

20 Years in Cable Testing and Tracing R&D and Manufacturing.

Our Story
NOYAFA NF-8209Pro

Multi-function Wire Tracker

Tracking/Testing All done in one

Safety Protection

60V voltage resistance and anti-burning. Supports safe and fast Continuity at voltages not exceeding 60V

High standard joints Close Connection crystal head

Suitable for RJ45 network cable interface, RJ11 telephone line interface, two-core telephone line can be transferred through crocodile clip line.

Network cable finder function Find the target line quickly

Can quickly find the correct network cables, telephone line, and metal cables in messy pile and long-distance

How to find the telephone line

  1. Connect the transmitter to the telephone line port
  2. Hold the seek button and use the receiver to seek at the other end

Newly upgraded line Search function Avoid running back and forth

Under the state of line-seeking, there is no need to adjust the host can be directly aligned to greatly improve the efficiency of detection!

Line Seguence indicator lights Makes Continuity easy and simple

Plug the network cable/telephone cable into the host and slave port and Select the button to the Cont function.

PoE Test Identify PoE devices quickly

Can test MCU, IEE802.3af/at protocol POE switch

Port blinks ldentify the docking port Speed negotiation Clarify line parameters

Connect the cable to the Flash/PoE/length port of the host and the target device (switch router). The blinking port is the port to which the line to be tested is connected.

Single-Ended CrystalI Heads Crimp Seconds

Automatically determine whether the cable crystal head crimping is accurate, the difference between traditional testers only one end of the crystal head can also be tested

Signal enhancement Longer measurement distance

Conduct continuity test on350-meter whole box line. Line finder can search 100 meters distance unshielded network cable

NCV Inductive Alarm Detection

Place the receiver probe close to the AC power will emit a beeping alarm sound when receive the signal

Built-in flashlight Convenient in dark places

Flashlight function: No Worry of dark and complex environment Convenient for working in dark areas