Wire Locator & Optic Fiber Tester
One-press to detect and trace RJ45 network cables. Can also be used a an Optical Power Meter to check the fiber optics.
Support Multiple Cables
What cables can NF-918S track and check? UTP & STP cables, telephone cables, electric cables & wires, BNC coaxial cables.
Anti-jamming Cable Scan
With the high-sensitive detector, quickly locate the cable you're looking for despite different signals existing.
Two Scanning Modes
Choose from two modes for your cable scanning: Digital & Analog.
- Analog: Find a cable via the analog signals;
- Digital: The fast and accurate solution to find a cable among a bunch of cables despite noises and signals.
Scan Cable on PoE Switch
When a cable is connected with PoE Switch, router, PC, or other devices, don't worry. NF-918S can help you quickly nagivate the connected port.
Test After Scan
After you trace the cable, start the continuity test with one easy press.
Fast/Slow Cable Continuity Check
Run a continuity check by inserting the target cable. Press CONT to start. Open or short circuit, crossing, or other faults will be identified.
PoE Switch Test
If the cable is connected to a PoE Swithc or other devices, the continuity test of NF-918S will start and complete successfully as well.
PoE Core Connection
Determine the connection of PoE switch power supplies.
Optical Power Meter
NF-918S can test optical fiber signal power too. 6 wavelengths are available: 850, 1300, 1310, 1490, 1550, 1625nm.
Strong & Stable Indication
To see if the fiber-optic cable is broken of not, you can choose one indication mode from three. If the red light flashes as you set, the cable is good. Otherwise, you need to replace one.
One-click identification of live equippment, indlucing wire, socket, etc. Avoid possible damage from strong electricity during checking or construction.
A build-in LED light can be found on NF-918S Receiver. Even if you trace cables in dark places, this light helps you finish your task easily.