Noyafa Announce Red Hand held High Temperature Fahrenheit Thermometer

The thermometer can measure the water，metal ，wall，The target through the window and more.

Noyafa's new forehead thermometer DT8550E, DT600, DT8550AH, under the development of modern science and technology. The temperature measuring gun uses high-precision imported sensors, and the sensitive temperature measuring probe measures more accurately with an error of 0.1 °C. It takes 0.5S to display the temperature value of the measurement target. Of course, it can continuously measure multiple times without contact, and save the data. It can measure from a long distance, without touching the target, and without collecting samples, it can quickly, accurately and intuitively display the temperature data of the target.

This industrial thermometer can absorb 0.76 μm - 100 μm near-band infrared light, because the object contains 9 μm -13 μm emitted by medium energy, because the infrared wavelength emitted by the material object  is not absorbed by the air, so the infrared size of the object and the environment are measured. It doesn't matter. Therefore, the temperature of the measured target can be accurately detected only by measuring the infrared energy of the material object  itself.

As long as the temperature of all objects in the world is higher than absolute zero (-273.15°C), the object will emit infrared wave energy to the surrounding space. Of course, the energy and wavelength of this thermal radiation will only be related to the surface temperature of the object. That is to say, this thermometer can collect the infrared energy of the target object through the lens to the sensor, and the sensor will get a voltage signal after processing. The voltage signal is processed. The temperature value of the target item can be easily obtained.

Infrared diagnostics provide reliable predictions for electrical equipment and other maintenance. Maintenance of large units, and smooth operation of the power system.

For example, in the power system, metallurgical industry, food production and processing industry, measuring machinery, transportation, and even household, and other heat treatment industries. Measure temperature values on hard-to-reach surfaces

DT600

1. Measuring range -50℃～600℃

2. Temperature measurement accuracy ±2°C or 2%

3. Measurement response time 500ms

4. 9 measurement data storage

5. Measure high/low temperature alarm

6. Dual laser measurement mode

7. Automatic shutdown and battery percentage display function

8. Fahrenheit/Celsius Conversion

9. Replaceable 9V battery

10. Measuring distance ratio 16:1

11. Backlight display

DT8550E

1. Measuring range -50℃～550℃

2. Temperature measurement accuracy ±2°C or 2%

3. Measurement response time 500ms

4. 9 measurement data storage

5. Measure high/low temperature alarm

6. Dual laser measurement mode

7. Automatic shutdown and battery percentage display function

8. Fahrenheit/Celsius Conversion

9. Replaceable 9V battery

10. Measuring distance ratio 12:1

11. Backlight display

DT8550AH

1. Measuring range -50℃～380℃

2. Temperature measurement accuracy ±2°C or 2%

3. Measurement response time 500ms

4. The measurement data keeps the highest data one

5. Measure high/low temperature alarm

6. Single laser measurement mode

7. Automatic shutdown and battery percentage display function

8. Fahrenheit/Celsius Conversion

9. Replaceable 9V battery

10. Measuring distance ratio 12:1

11. Backlight display

Notice:Problems that should be paid attention to when using infrared thermometers.

1. Only can measure the surface temperature , can’t measure the internal temperature.

2. The wavelength above 5 um cannot be measured through quartz glass. Measuring glass temperature for reflection and transmission properties does not give accurate temperature readings.

3. Locate the hot spot. To find the hot spot, the instrument should aim at the target, and then scan the target up and down until the hot spot is determined.

4. Fog, dust, smoke and other factors will affect the energy value of infrared radiation of the receiver mobile phone. This affects the accuracy of the temperature value.

5. Ambient temperature, if the thermometer is suddenly exposed to an ambient temperature difference of 20°C or higher, allows the instrument to adjust to the new ambient temperature within 20 minutes.

In order to measure the temperature, point the instrument at the object to be measured, press the trigger to read the temperature data on the LCD of the instrument, and ensure that the ratio of distance and spot size, and the field of view are arranged.

Infrared temperature measurement technology plays a huge role in the quality control and detection of production and other activities, in fault diagnosis, safety protection, etc.